top of page

OUTDOORS ESSENTIALS

ARB’s ALL NEW LC300-SPECIFIC NEXT GENERATION SUMMIT BAR

The Next Generation ARB Summit Bar muscles up with the most innovative and advanced technology, all while fully integrating with Toyota’s suite of advanced driver assist safety technology that are specific to the LC300.


The Next Generation Summit Bar has eliminated front buffers and now has robot welds on the front face of the bar to highlight ARB’s excellence in sheet metal fabrication. Fog light design has been significantly updated to include a plug and play indicator / clearance light / daytime running light (DRL) and fog light within one complete unit, for an integrated approach to incorporate these requirements on modern vehicles.



Features

· Durable steel construction for maximum protection.

· Incorporates ARB’s renowned multi-fold upswept and tapered wing design for optimum

strength and approach angle.

· Superbly engineered, air bag compatible mounting system secures to chassis via high

tensile bolts and hardware.

· Split pan design for maximum strength and airflow.

· Extensive under protection panels on centre and either side.

· 30mm radius on wings and centre section.

· 60.3mm outer tubing and centre cross bar.

· Compatible with Toyota features including Toyota Safety Sense, Lane Trace Assist,

dusk-sensing auto headlamps, front parking sensors, 4-camera Multi-Terrain Monitor.

· Combination style bar to suit both winch and non winch applications

· Twin Hi-Lift jack points in lower pan.

· Will accommodate Warn, Magnum, Bushranger and Smittybilt low mount model electric

winches up to 12,000lb.

· Provision to accommodate ARB Intensity LED, and a range of IPF and Bushranger

driving lights.

· Two aerial brackets located on the outer frames.

· Metaprep primer for additional corrosion resistance.

· Finished in a hard wearing matte black powder coat with the added option of colour

coding to individual vehicles.

· Pressed top pan and winch cover panel.

Includes ARB LED fog light, LED daytime running light, and LED indicators and clearance

lights.


ARB PRESSURE CONTROL WITH COMPRESSOR CONNECT APP

Whether you need to pump up your vehicle’s tyres remotely or let them down before hitting the tracks, with ARB Pressure Control and the Compressor Connect app, there’s no need to always keep the inflator, deflator or pressure gauge handy – you can control your compressor and set target tyre pressures straight from your mobile device!


Compatible with your ARB onboard single or twin air compressor, the ARB Pressure Control unit works with the Compressor Connect app allowing you to inflate/deflate your tyres easily and with little effort.


How It Works

Inflating or deflating tyres with ease? All it takes is a few easy steps! Set your target pressure via the mobile app, connect an air hose from your compressor to your tyre valve with a standard chuck and watch the Air Pressure Control unit work with your compressor to inflate/deflate your pre-set target pressure – all without needing an inflation/deflator gauge!


A vibration and audio alert will sound on your smart device when your target pressure is achieved, meaning you can disconnect the hose from the tyre and move onto the next!


Compatibility

Suits ARB Air Compressors: CKSA12, CKMA12, CKMTA12

Suits 12-volt electrical charging system


In The Box

· Pressure-regulating valve.

· Pressure transducer.

· Pressure control module.

· Mounting bracket.

· Wiring harness.

· Installation instructions.


ARB ESPERANCE ROOFTOP TENT

Drawing heritage from the beautiful beaches and crystal-clear waters of one of Western Australia’s most renowned coastal environments, the Esperance RTT expands ARB’s rooftop tent family. ARB’s first ever hardshell tent, the Esperance is a super lightweight, slimline and contemporary looking hardshell rooftop tent.

With convenience-centric design in mind, the Esperance is quick and effortless both to set up and to pack down. With features such as an internal telescopic ladder, gas strut assisted opening, and only three push-lock ratchet straps, travelling with the Esperance is a breeze.



Features

Simply lift, pull and rest

  • Set up is as simple as unclamping the cover, lifting it up, and folding out the tent via a pull.

  • Can be packed up with compact bedding left inside.

  • Internally stored telescopic ladder.

Extra protection

  • Wind-resistant, slimline hardshell design that has been crafted with a streamlined mould.

  • Stainless steel hardware for long-term durability.

  • Canvas is made from 200GSM poly cotton fire retardant with a silver-coated 2m water head.

  • Fly is made from removable 210D fire retardant canvas, with silver-coated 3m water head.

Roomy and comfy interior

  • When set up, enjoy a large overall internal bed space: 1520mm (L) x 2000mm (W) x 1200mm (H at centre).

  • 4cm thick, high-density sponge featuring a quilted polyester peach skin removable mattress cover.

  • Manage airflow via the three zippered windows featuring dual midge-proof mesh screen.

  • Integrated vent ensures maximum airflow and reduced condensation.

  • Stargazing moonroof.

Handy features

  • Features an internal dimmable LED strip light with concealed cables.

  • External LED strip lighting to help you out late at night.

  • Includes internal storage pockets, shoe pockets, cargo pockets, mounting kit and hardware.




CARAVAN AND RV REVERSING AID – REVERSEMATE

Reversing cameras are not always the best option when it comes to RV, Caravan and Motorhome reversing aids. That’s where ReverseMate™ can be a simpler and cheaper alternative.

A handy learning tool for people learning, the ReverseMate markers help when reversing your RV, Caravan or Trailer into your desired site. Supplied are 2 high visible markers with 5m tapes, plus LED lights for when you need to park at night.

When you arrive at your designated site, it is a matter of just setting out the markers as per instructions included in packaging. The ReverseMates alleviate the confusion of the spotter saying Right Hand Down and Left Hand Down signals.



Features:

· Durable aluminium with 316 Stainless steel fittings.

· Highly visible orange markers with LED lights.

· White LED can be used as a work light.

· Built-in 5m tape measure.

· Comes with a carry bag and instructions.

· 12 Months Warranty (noteLED Batteries not included in Warranty).

Total weight of ReverseMate is 2.6kg, folds down to 600mm long, 100mm wide and 70mm high.



LIGHTHOUSE 600 LANTERN

The recently upgraded lantern provides 600 lumens of multi-directional, adjustable light. Packed with unique features, the Lighthouse 600 adapts to light up any situation; perfect for camping, outdoor events, or emergency use. Complete with an internal lithium battery, the Lighthouse even doubles as a power hub for charging phones and small USB devices.


There are 3 ways to charge the lighthouse 600 lantern: The Sun The Lighthouse 600 can be charged by connecting a compatible solar panel. The Nomad 10 Solar Panel can charge the Lighthouse 600 in about 6 hours.

USB The Lighthouse 600 Lantern can also be charged by being plugged into a USB power source.

Hand Crank When you are really in a pinch, use the hand crank to get 10 mins of light for every 1 minute of cranking.


Key features

  • Bright Light Anytime, Anywhere. Dimmable and turbo settings for adjustable light, up to 600 lumens. Recharge the internal battery from any USB port or from a Goal Zero Nomad Solar Panel. Use the built-in hand crank to charge up instantly and never be left in the dark.

  • Recharge Phones, Boost Tablets. Internal lithium battery boasts 5,200mAh with a 1.5A USB output, enough power to recharge phones and tablets even off grid.

  • Hang It, Stand It, Store It. Collapsible legs provide a stand for taller light and fold in for convenient storage. Built-in handle for easy carrying and hanging.

  • Dualite Directional Lighting. Utilize 360 degree of bright LED light, or save on power and extend runtimes by illuminating half the lantern.

Run time

  • One side lit (low power) 48hrs

  • One side lit (high power) 3hrs

  • Both sides lit (low power) 24hrs

  • Both sides lit (high power) 2hrs

  • Hand crank: 1 W (cranking at 130 RPM)

  • 1 minute of crank = 10 minutes of light on low

Charge times

  • Nomad 10: 6hrs

  • USB source: 6hrs


TRUMA AVENTA ROOF-MOUNTED AIR CONDITIONING SYSTEM: STAY COOL ON HOT DAYS OR WARM ON COOL DAYS


Save space in your van by installing an Aventa air-conditioning system in your roof; having a stylish flat design inside the vehicle ensures maximum space in your van.

Truma Aventa comfort is a roof-mounted air-conditioning system with 2400W cooling output and 1700W heating output – thanks to the integrated heat pump.

Truma Aventa comfort cools your vehicle to its desired temperature very efficiently. The air is also cleaned and humidified to ensure a pleasant environment in your van. The features don’t end here; this system can also be used as a heater. Whilst also being very energy efficient.

o Very efficient in cooling and heating modes.

o Switch the air conditioning system on and off easily with the remote control.

o High output.

o Extremely lightweight weighing just 33 kilograms.

From a technical aspect, all Aventa air conditioning systems are optimised so that they run especially quietly. Cool air flows throughout the entire vehicle via the air distributor. To set the ideal airflow, adjust the four air outlets to the desired level. The air distributor also has an integrated dimmable mood lighting feature.

Adjust the room temperature either by remote control or on the digital CP plus. This is available from Leisure-Tec. In combination with a Combi heater, you can even have automatic climate control. The heater and air conditioner are then controlled automatically until the desired temperature is reached.

A specialist workshop can install the Truma Aventa comfort air-conditioning system in place of a skylight. As the inside air distributor is very flat, it hardly obstructs free movement inside the vehicle.



BARNETT QUICKSILVER BOW


Bring new archers into the fold with the Quicksilver® recurve bow. A light 15-pound draw weight and ambidextrous grip make this a great introductory bow for ages 5 through 8. Additional features include a soft-touch reinforced grip, finger rollers and adjustable sight pin. The Quicksilver youth archery set also comes packaged with lightweight fibreglass arrows so kids can start honing their archery skills right away!

Features:

  • Ambidextrous soft-touch reinforced grip.

  • Built-in adjustable sight pin.

  • Soft-touch finger rollers.

  • 15lb Draw Weight.

  • 18-22in Draw Length.

  • Arrow rest.

All-new look featuring Mossy Oak® Bottomland® camo.



PRO-SWING 45 harness with innovative weight distribution

The PRO-SWING 45 harness has been designed for ultimate convenience and functionality and incorporates Minelab's innovative weight (W8) distribution system. W8 technology evenly distributes the detector’s weight, so that even after many hours of detecting you are unable to feel that any specific part of your body is carrying the detector’s weight. This means that you can detect for much longer without feeling any strain.


W8 technology employs three biomechanical strategies to transfer the detector mass (weight) away from the operator’s arm:

  • Remove flexion and extension muscle strain.

  • Use solid skeletal structure to support loads.

  • Avoid soft tissue anchor points.

These effectively remove the need for the arm’s muscles to tense in a flexion extension position while swinging the detector, and therefore prevent the muscle fatigue and soreness that is commonly experienced with metal detecting. W8 technology also allows the arm to freely medially rotate and abduct to swing the detector without the need to hold it up off the ground.

Features:

· The harness can be custom-fitted through 8 adjustment points and attach other

detecting equipment in 8 separate places.

· You can easily switch between detecting and digging at the flick of a clip. Clip on to

engage W8 technology and clip off for fuss free digging.

· It only takes one hand to adjust the bungy to quickly adjust the detector distance.

· The Universal S-cuff is attachable to any detector - one size fits all. Simple velcro design

allows instant portability.

· Suitable for both left and right handed users with a simple click in J-strut.

· A padded back cushion provides ultimate comfort with improved ventilation from the

extra wide strap.


bottom of page